Ex DEMO  Mic,   comes with DPA full  warranty  

This microphone offers clean and transparent sound quality with lots of headroom. For years, this has been the chosen headset mic for broadcasters as well as West End Theatres, as well as in many auditorium and lecture halls. This is due to its pristine sound and durability.

 
The headset construction is unique. You can detach the mic boom from the headset mount to switch it to either the left or right side and then reattach it. Humidity, often an issue in theatrical applications, is not a problem. This microphone is constructed with a double-vent protection system and a drop stopper on the microphone boom. Also, the materials inside the mic are water resistant. These design elements make it very difficult for the microphone to fail due to humidity.

The microphone’s sensitivity is 6 mV/Pa. This matches the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly, the microphone will be able to handle very high sound pressure levels up to 144 dB SPL before clipping occurs.
 

Total harmonic distortion: < 1% THD up to 137 dB SPL peak
Dynamic range: Typ. 111 dB
 
 

Adapter system gives you flexibility

The adapters for wireless systems give you flexible, simple and affordable possibilities when you choose the MicroDot termination and an adapter. You are no longer b’ound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a completely new microphone. When you make the switch, you won't hear any loss or change in sound quality.

The d:fine™, d:screet™ and d:vote™ series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones’ ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.
 

Specifications

Polar Pattern Omnidirectional
Principle of Operation Pressure
Cartridge Type Pre-polarized condenser
Frequency Range 20 Hz to 20 kHz
Frequency Range +/-2 dB: Soft-Boost Grid: 20 Hz to 20 kHz, 3 dB soft boost at 8 to 20 kHz
Optional High-Boost Grid: 20 Hz to 20 kHz +/-2 dB, 10 dB boost at 12 kHz
Sensitivity Nominal, +/-3 dB at 1 kHz: 6 mV/Pa, -44 dB re. 1 V/Pa
Equivalent Noise Level A-Weighted: 
Typical: 26 dBA re. 20 µPa
Maximum: 28 dBA

ITU-R BS.468-4: 
Typical: 38 dB
Maximum: 40 dB
S/N Ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
Total Harmonic Distortion (THD) <1 % up to 123 dB SPL peak
<1 % up to 120 dB SPL RMS sine
Dynamic Range Typical 97 dB
Maximum Sound Pressure Level (SPL) Peak Before Clipping: 144 dB
Output Impedance From MicroDot: 30 to 40 Ω
Cable Drive Capability Up to 984' (300 m)
Connector MicroDot
Temperature Range -40 to 113°F (40 to 45°C )
Relative Humidity Up to 90%
Cable Length 4.1' (1.25 m) 
Cable Diameter: 0.06" (1.6 mm)
Microphone Diameter 0.20" (5 mm)
Length: 0.39" (10 mm)
Boom Length 3.5" (90 mm)
Weight Single-Ear Microphone Boom: 0.035 oz (1 g)
Earhook: 0.035 oz (1 g)
Cable: 0.28 oz (8 g)
Total: 0.35 oz (10 g)
 
SKU DP-4066-F
Brand DPA
Unit Of Measure ea

Be The First To Review This Product!

Help other Angkor Music users shop smarter by writing reviews for products you have purchased.

Write a product review